These easy-to-install kits quickly replace the stock Sensor links with Billet Aluminum Fully Adjustable Sensor Links. With these links you can safely lift the normal stock ride height by as much as 2.5" to 2.75" depending on your application. All air suspension operating mode heights will operate relative to the new settings. These links utilize the factory ball studs to ensure the suspension continues to operate properly in all operational modes.
When the front links are shortened and the rear links are lengthened the voltage coming from the air suspension sensors is altered. This tricks the vehicles on board computer into thinking the vehicle is sitting lower than the factory setting thereby raising it accordingly.
NOTE: THIS KIT IS FOR 2013-2015 RAM 1500 PICKUPS, CLICK HERE FOR THE 2016-2018 LIFTING LINKS
NOTE: All factory functions will continue to work the same however lifting above 2.5" may cause a payload warning which is why we recommend a maximum lift of 2.5" if you intend to go into the Off Road 2 setting. If you don't intend to use Off Road 2 this would not be an issue. If your lifting into Off Road 2 for your normal ride height we recommend that you have an alignment done.
IMPORTANT! PLEASE READ ALL INSTALLATION INSTRUCTIONS FIRST!
If in doubt, please contact our sales department before installation. If you feel you lack the necessary skills
please have your links installed by a professional mechanic. Revel Performance or it’s suppliers will not
be held liable for any loss or injury due to improper installation.