Revel's Adjustable Air Suspension Links replace the stock sensor links to alter the ride height while maintaining functionality of the truck's factory air suspension modes. This half kit allows you to select either the front pair or rear pair of adjustable links. The links utilize the factory ball studs for easy installation and require no alterations or cutting. Revel Links can also be easily removed at any time.
Compatibility
2019-2026 Ram 1500 with factory four-corner air suspension
IMPORTANT – Front Links on Ram Rebel and Off Road Package (ORP) models: These trucks have an increased factory front ride height compared with other Ram 1500 models. Adjustable front links alone will not properly level these trucks. The required front spacers must be used in conjunction with the adjustable links.
If your goal is to properly level a Ram Rebel or Ram equipped with the factory Off Road Package, please select our Basic or Advanced Lift Package rather than purchasing front links alone. These packages include the required front spacers along with adjustable front and rear links.
For additional information on leveling Ram Rebel and Off Road Package models, please see Customer Support Q001 – Ram Rebel / Off Road Package Leveling.
2019 Ram 1500 Classic: This model uses the previous-generation air suspension. Please select our 2016-2018 Ram 1500 adjustable links.
Front or Rear Selection
This product includes one pair of adjustable links. Select either Front or Rear when ordering. If you require adjustment at both ends of the truck, please select a complete set of four links instead.
How they work
Revel Links alter the signal from the Ram's factory ride-height sensors. By changing the length of the sensor links, the truck's onboard computer detects a different suspension position and adjusts the air suspension to compensate. This allows the ride height at the selected end of the truck to be adjusted while retaining the functionality of the factory air suspension system and its different ride modes.
How they are made
Revel Links are made from aluminum with a molded silicone coupler and are manufactured using CNC technology to achieve optimal performance and reliability.
Disclaimer
Please read all instructions and contact our team with any questions prior to installation. If in doubt, please have your links installed by a licensed mechanic. Lifting above 2.5" may result in a payload warning and restrict the use of the Off-Road 2 suspension setting. An alignment may be required when significantly altering the front ride height. Revel Performance or its suppliers will not be held liable for any loss or injury due to improper installation.
Installation Instructions can be downloaded <here>
For Questions? Check out our FAQ
