No Image Available

2010 Dodge, 2011 - 2013 Ram, 2021 - 2022 Ford ZONE 4.125in Rear Block Kit Dodge 2500

ZONF90N

Important Kit Notes:

  • Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear drive shaft. (Safety Recall 21S25) Due to the recall procedure, Zone Offroad recommends to have this performed prior to installing the lift.”
  • 18" or larger diameter wheels required. Stock 17" and 18" wheels cannot be reinstalled. Stock 20’ wheels can be used with up to a 305/60R20 tire.
  • 18" wheels with 5-5.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 18 - 20"wheels with 5.5-5.75" of backspacing is highly recommended for tire to frame crash bar clearance. 37" tires will require crash bar modification
  • Models with 2-piece rear driveshaft WILL require carrier bearing shim kit D5405 (not included w/ kit).
  • Block kits replace factory 1-1/4” block. Stock block will not be reinstalled.
  • Crash bars may require modification based on wheel and tire choice. It is the end users responsibility to ensure modifications are non-detrimental to vehicle safety.
  • Does not fit diesel models.
  • Will not fit Tremor models.
  • Requires frame bracket modification

Shipping Information

  • Item Requires Shipping
  • Free Ground Shipping (Lower 48)