These easy-to-install kits quickly replace the stock Sensor links with Billet Aluminum Fully Adjustable Sensor Links. With these links you can adjust the normal stock ride height by as much as 2.5" to 2.75" depending on your application. All air suspension operating mode heights will operate relative to the new settings. These links utilize the factory ball studs to ensure the suspension continues to operate properly in all operational modes.
When the front links are shortened and the rear links are lengthened the voltage coming from the air suspension sensors is altered. This tricks the vehicles on board computer into thinking the vehicle is sitting higher or lower than the factory setting thereby adjusting it accordingly.
IMPORTANT! PLEASE READ ALL INSTALLATION INSTRUCTIONS FIRST! If in doubt, please contact our sales department before installation. If you feel you lack the necessary skills please have your links installed by a professional mechanic. Revel Performance or it’s suppliers will not be held liable for any loss or injury due to improper installation.
No posts found