2016-2018 RAM Adjustable Air Suspension Links to Level/Lift (Front & Rear)

List price: $325.99
You save: $106.00 (33%)
Save 33%
5 item(s)

These easy-to-install kits quickly replace the stock Sensor links with Billet Aluminum Fully Adjustable Sensor Links. With these links you can safely lift the normal stock ride height by as much as 2.5" to 2.75" depending on your application. All air suspension operating mode heights will operate relative to the new settings. These links utilize the factory ball studs to ensure the suspension continues to operate properly in all operational modes. NO CUTTING of Stock Components

When the front links are shortened and the rear links are lengthened the voltage coming from the air suspension sensors is altered. This tricks the vehicles on board computer into thinking the vehicle is sitting lower than the factory setting thereby raising it accordingly.


NOTE: All factory functions will continue to work the same however lifting above 2.5" may cause a payload warning which is why we recommend a maximum lift of 2.5" if you intend to go into the Off Road 2 setting. If you don't intend to use Off Road 2 this would not be an issue. If your lifting into Off Road 2 for your normal ride height we recommend that you have an alignment done.

IMPORTANT! PLEASE READ ALL INSTALLATION INSTRUCTIONS FIRST! If in doubt, please contact our sales department before installation. If you feel you lack the necessary skills please have your links installed by a professional mechanic. Revel Performance or it’s suppliers will not be held liable for any loss or injury due to improper installation.

For Questions? Check out our FAQ

Installation Instructions (2016-2018_Ram_Raise.pdf, 823 Kb) [Download]

Very easy to install, I was able to put 35X12.50X20 on my 2018 Ram Rebel and gained at least 2 inches! Would definitely recommend...
2016 RAM LEFT SUSPENSION Down Can I adjust the level with this item?
I want to level my truck, can I do just the front and not the rear?

Thanks for your interest. Yes the links are shipped at stock lengths so if you put them on "as shipped" without making any adjustments your truck will sit exactly the same as stock. By shortening the front links and leaving the rears alone you can just level the front. However you will need to purchase a complete set as our kits are sold compete with front and rear links.
Very easy to install and adjust on my 2016 Ram Rebel. I was able to get 2" of lift without compromising any ride comfort and fit 35" tires. I used 20x9 wheels with 0 offset- my tires are 35x11.50x20

These links were easy to install and made levelling the truck a breeze.
Write a review