These easy-to-install kits quickly replace the stock Sensor links with Billet Aluminum Fully Adjustable Sensor Links. With these links you can safely lower the normal stock ride height by as much as 2.5" to 2.75" depending on your application. All air suspension operating mode heights will operate relative to the new settings. These links utilize the factory ball studs to ensure the suspension continues to operate properly in all operational modes.
When the front links are lengthened and the rear links are shortened the voltage coming from the air suspension sensors is altered. This tricks the vehicles on board computer into thinking the vehicle is sitting higher than the factory setting thereby lowering it accordingly.
THIS KIT IS FOR 2016-2018 RAM 1500 PICKUPS, CLICK HERE FOR THE 2013-2015 LOWERING LINKS
IMPORTANT! PLEASE READ ALL INSTALLATION INSTRUCTIONS FIRST! If in doubt, please contact our sales department before installation. If you feel you lack the necessary skills please have your links installed by a professional mechanic. Revel Performance or it’s suppliers will not be held liable for any loss or injury due to improper installation.
No posts found